2017 Alfa Romeo Giulia
Mileage
121,342
Service Date
7/20/2026
Services Performed
- Verified check engine light illuminated on IPC. Using autel produced fault code report found three codes stored in ECM, p044000, evaporative emissions system. P045600, evaporative emissions system leak detected very small leak. P1CEA00, boost side evap purge system performance. Performed visual inspection, smoke tested systems with no external leaks found, tested operation of purge value, purge valve operating as expected at this time. Noted small amount of smoke leaking past on throttle body side when solenoid commanded off. (Internal leak). Purge valve intermittently sticking.cleared DTCs test drove vehicle no check engine light at this time. \ recommend replacing purge valve and retest.
- Remove and replace evaporative solenoid. // Inspect condition of related hoses. // Smoke testevap system and observe for leaks. No leaks found. // Remove outlet hoses for EVAP solenoid, no leakage past valve. // Attempt manual function control of purge valve. Not able to perform function.
- Drained coolant, removed Breather house, heat sheilds, and coolant manifold. Replaced ed gaskets and manifold and reinstalled. Installed new Breather hose. Vacuumed and held. No leaks after test drive.
- – Set the tire pressure to manufacturer specifications. – If the wheels were removed for any repairs this visit, the wheels lug nuts/bolts were torqued down to manufacturer's specifications. *****An **N/A** wheel torque value is filled in above when the wheels were not removed during this visit. *****
Savannah F. gave our service a 5 star review on 7/21/2026
